Also, unless I am missing something, doesn't the measurement and description table have to be moved from the actual template to the description box on the one page lister form, so that I can enter the new information for each listing?
Hi Deb,
Do you happen to know the color code numbers for the rose-pink and green you're using?
Here's why I'm asking.
http://practicewriter.com/vu/?52C28
I been trying to nail the shade of green, but don't think I got it exactly.
Run your mouse over the thumb fields for the backlight effect for other color.
It's still a work in progress. Got alot done over coffee in the AM.
Dan
Do you happen to know the color code numbers for the rose-pink and green you're using?
Here's why I'm asking.
http://practicewriter.com/vu/?52C28
I been trying to nail the shade of green, but don't think I got it exactly.
Run your mouse over the thumb fields for the backlight effect for other color.
It's still a work in progress. Got alot done over coffee in the AM.
Dan
YEA, your here!! You must really love this stuff, you do puter work all day and them come home to your "hobby" of helping us newbies!
My green is hex# ccffcc
I don't think I am using the rose pink on the new template, (am I?) but went to the gray shades to better match the new flash banner.
My green is hex# ccffcc
I don't think I am using the rose pink on the new template, (am I?) but went to the gray shades to better match the new flash banner.
Oh, I spoke too soon, I see what you did with the thumbs, YES, I LOVE THAT...will get you a rose pink hex in a sec!
rose pink hex # ffccff
Hi Neil,
Yes, the logo colors are more vibrant than the measurement table colors, but Danno,for the thumbs, etc, I prefer the softer colors.
Yes, the logo colors are more vibrant than the measurement table colors, but Danno,for the thumbs, etc, I prefer the softer colors.
Danno,
You make me crazy!! How could you put that much template together in such a short amt of time?
I've been on since at least 1:30 EST today, and only managed to copy and paste code and it still isn't all lined up!!
You make me crazy!! How could you put that much template together in such a short amt of time?
I've been on since at least 1:30 EST today, and only managed to copy and paste code and it still isn't all lined up!!
Hi,
That green doesn't seem to match the green in the logo?
Would turning the surround on the thumb to white-white work or I can turn off the effect? Usually, best to see with a thumb over the top. That helps.
Danno
That green doesn't seem to match the green in the logo?
Would turning the surround on the thumb to white-white work or I can turn off the effect? Usually, best to see with a thumb over the top. That helps.
Danno
Hi,
The "SophieBox" concept is something I thought-up months ago. This is codesets I have that I just pull together (some assembly required
). This set doesn't include the Live Inventory module. You wandered into the exact thing I've been working on for months.
Danno
The "SophieBox" concept is something I thought-up months ago. This is codesets I have that I just pull together (some assembly required
). This set doesn't include the Live Inventory module. You wandered into the exact thing I've been working on for months.Danno
You are correct, the hex # I gave you for the mouseover effect is much softer than the logo colors...it matches the background color of the measurement table.
May be we should just use soft grays, so that they go with the template banner?
Did you see my ? above on putting the measurement and description table into the description box on the 1 page lister form vs. into the template itself?
I don't know how I will enter each item's measurements and description if the table is in the template, and not in the 1 page lister?
What is this sophie box your are inventing?
May be we should just use soft grays, so that they go with the template banner?
Did you see my ? above on putting the measurement and description table into the description box on the 1 page lister form vs. into the template itself?
I don't know how I will enter each item's measurements and description if the table is in the template, and not in the 1 page lister?
What is this sophie box your are inventing?
Hi,
Those changes are on the practiceboard (same link as prior).
On the tables, etc for Descriptio, Yes, they would probably work best by insertion in the one-page lister. The green field is narrower than the prior. I can expand the template width to compensate. I would suggest some additional changes to that piece to help.
Danno
Those changes are on the practiceboard (same link as prior).
On the tables, etc for Descriptio, Yes, they would probably work best by insertion in the one-page lister. The green field is narrower than the prior. I can expand the template width to compensate. I would suggest some additional changes to that piece to help.
Danno
No, don't turn the mouseover effect off, I think it holds the viewer's attention a nanosecond longer!
I love the size of the pics!
On the description/measurement table, the width you have now looks ok to me? I think bigger pics and fewer words is good for my clients!
On the description/measurement table, the width you have now looks ok to me? I think bigger pics and fewer words is good for my clients!
Hi,
The backlight effect will "visually" show as a 2 pixel border around each thumb. I can turn the border to any color. I was using the rose-pink to compliment the green for your logo / Store colors.
The only problem with the narrow green was the box with the models measurements. It squishes too small to be readable. I assume it could be redone. I would also rework the table to use white and grey background and better space arrangement. The green background then serves to anchor those elements. I can rework the table for demo.
Danno
Edit: I agree with your last comment. I work the exact pixel measurements first, then I build. I did a rough-layout last night before bed.
The backlight effect will "visually" show as a 2 pixel border around each thumb. I can turn the border to any color. I was using the rose-pink to compliment the green for your logo / Store colors.
The only problem with the narrow green was the box with the models measurements. It squishes too small to be readable. I assume it could be redone. I would also rework the table to use white and grey background and better space arrangement. The green background then serves to anchor those elements. I can rework the table for demo.
Danno
Edit: I agree with your last comment. I work the exact pixel measurements first, then I build. I did a rough-layout last night before bed.
No, I can't redo the model measurement pic...I had the gal that did the banner make that, and I don't have a resizer, so widen the whole table.
Your suggestions for reworking the measurement sound good to me if you have time!
So would you then save the measurement table code separately so I can copy it to the one page lister? Or how does that work?
Do you still have time yet this evening to finish this?
I am busy trying to get listings done to launch tonight for the big Thanksgiving weekend endings.
Your suggestions for reworking the measurement sound good to me if you have time!
So would you then save the measurement table code separately so I can copy it to the one page lister? Or how does that work?
Do you still have time yet this evening to finish this?
I am busy trying to get listings done to launch tonight for the big Thanksgiving weekend endings.
BTW, The original measurement table you did for me the other night, works well. I am using it right now to write the listings.
I don't care for that red around the shipping and payment info, and if you could use a verdana font instead of the typewriter look...I know, getting bossy here!
I don't care for that red around the shipping and payment info, and if you could use a verdana font instead of the typewriter look...I know, getting bossy here!
Hi Deb,
Here's a quick rough of how that right-side currently looks.
http://practicewriter.com/vu/?52C63
I think the table takes up too much space without using more columns to display the info. That needs work. Note, the "float" design on the green mat effect. As you can see, the scrinch on the About Model box is a readability problem.
Danno
Here's a quick rough of how that right-side currently looks.
http://practicewriter.com/vu/?52C63
I think the table takes up too much space without using more columns to display the info. That needs work. Note, the "float" design on the green mat effect. As you can see, the scrinch on the About Model box is a readability problem.
Danno
What if you make the enlarged photo a bit less wide, so you have the amt of room you need for the measurement table (& about model pic) to fit properly?
I see that float effect, but I liked it all green or if you think we don't need the green just a soft gray will tie into everything else. I am thinking I don't need the green...I kind of like the monochromatic look and let the pics do the talking...my clients have the attention span of a gnat!
I see that float effect, but I liked it all green or if you think we don't need the green just a soft gray will tie into everything else. I am thinking I don't need the green...I kind of like the monochromatic look and let the pics do the talking...my clients have the attention span of a gnat!
Hi,
Let me see how much scale-up the Model box needs to become readable, and then work with resizing options. I'm designing up to 928px width to accomodate centering in eBay's New Design listing page. I believe your banner can scale-up, as part of any change.
I can appreciate the monochromatic too, as it does lessen any detraction from the article. I am focusing on a "retail look", instead of the traditional frilly templates.
I'm off for awhile, but will try to see what I can do before 9 AM tomorrow. I'm better with coffee challenge design.
Danno
Let me see how much scale-up the Model box needs to become readable, and then work with resizing options. I'm designing up to 928px width to accomodate centering in eBay's New Design listing page. I believe your banner can scale-up, as part of any change.
I can appreciate the monochromatic too, as it does lessen any detraction from the article. I am focusing on a "retail look", instead of the traditional frilly templates.
I'm off for awhile, but will try to see what I can do before 9 AM tomorrow. I'm better with coffee challenge design.
Danno
Much appreciation! Do you offer your services and talents for hire?
Good morning sunshine!
I jumped the gun on using the template and here is the link to one of the auctions I posted with it:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item...=STRK:MESE:IT&ih=013
As you can see, the old measurement table you coded separately fits perfectly into the area you designated for it in the template, so I don't think you have to fool with it? (I am using the description table in the one page lister form.)
My observations:
1.
The color change effect doesn't really work, because if there are less pics than the number of placeholders, the boxes show up with the color gray in the auction - which is distracting, so probably should remove the color change on mouseover and leave it white.
2.
The auction doesn't open with the large pic being filled in...shouldn't it?
3.
Removal of the red background around the shipping and payment info will be more effective.
Deb
I jumped the gun on using the template and here is the link to one of the auctions I posted with it:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item...=STRK:MESE:IT&ih=013
As you can see, the old measurement table you coded separately fits perfectly into the area you designated for it in the template, so I don't think you have to fool with it? (I am using the description table in the one page lister form.)
My observations:
1.
The color change effect doesn't really work, because if there are less pics than the number of placeholders, the boxes show up with the color gray in the auction - which is distracting, so probably should remove the color change on mouseover and leave it white.
2.
The auction doesn't open with the large pic being filled in...shouldn't it?
3.
Removal of the red background around the shipping and payment info will be more effective.
Deb
Hi Deb,
If you look at the banner, the page has spread to accomdate the wide green section. I will check and see if the banner can widen to accomodate the look. It was one option I mentioned.
The code was a work-in-progress, so it does have bugs.
Danno
If you look at the banner, the page has spread to accomdate the wide green section. I will check and see if the banner can widen to accomodate the look. It was one option I mentioned.
The code was a work-in-progress, so it does have bugs.
Danno
Hi,
The banner can expand to fit the middle sections width. The current width is 952px, which does exceed the eBay New Design listing page. If you can look at that listing in New Design at 1024 x 768 screen resolution, it should have a horizontal scrollbar at page bottom due to the width.
The model-box doesn't seem to allow any reduction without some loss of readability. It's width is dictating the page limits.
Options:
1. I could remove one vertical column of thumbs and drop from 15 to 10.
2. Reduce the main pic and thumbs to achieve page fit.
Danno
The banner can expand to fit the middle sections width. The current width is 952px, which does exceed the eBay New Design listing page. If you can look at that listing in New Design at 1024 x 768 screen resolution, it should have a horizontal scrollbar at page bottom due to the width.
The model-box doesn't seem to allow any reduction without some loss of readability. It's width is dictating the page limits.
Options:
1. I could remove one vertical column of thumbs and drop from 15 to 10.
2. Reduce the main pic and thumbs to achieve page fit.
Danno
Hi Deb,
Following your comments and suggestions, I took the option to remove effects. I increased width to 928px. I also redid colors to monochromatic and tried to match the grey in the Model box for the table and the lower background.
Here's the result.
http://practicewriter.com/vu/?52D1F
Danno
Oh...I also opted to fill the thumbs by column instead of row. That should give a better fill effect next to the large image, now that the backgrounds are removed. I noted you used 10 pics on that prior, so 5 10 or 15 in a shoot would now provide a filled look.
Following your comments and suggestions, I took the option to remove effects. I increased width to 928px. I also redid colors to monochromatic and tried to match the grey in the Model box for the table and the lower background.
Here's the result.
http://practicewriter.com/vu/?52D1F
Danno
Oh...I also opted to fill the thumbs by column instead of row. That should give a better fill effect next to the large image, now that the backgrounds are removed. I noted you used 10 pics on that prior, so 5 10 or 15 in a shoot would now provide a filled look.
WOW!
I repeat: WOW! The template looks beautiful! I can't begin to thank you enough for the hours you have saved me. I love the creative learning process; and would like to ask your advice on how best I could learn to do the coding it takes to produce web pages, templates, and sites?
May I copy and paste the code now?
deb
I repeat: WOW! The template looks beautiful! I can't begin to thank you enough for the hours you have saved me. I love the creative learning process; and would like to ask your advice on how best I could learn to do the coding it takes to produce web pages, templates, and sites?
May I copy and paste the code now?
deb
Hi Deb,
The only test I haven't done is run it through the Auctiva one-page lister to see if the tags are fully working. My code tester gives a clean bill. It's been checked in IE7, Firefox 3, and Safari 3.2.
The code includes the Description piece with <!--- comments --> to denote the beginning and end of that section. The [DESCRIPTION] tag also is commented out. Just need to copy the code to the template editor, remove /cut the Description section piece to the one-page, and uncomment the tag. That piece is now a stand alone TABLE for that right-element. The smoke-white background is in the template code, as is the font family. The entire template uses Verdana, with fallback to Arial, et. al. Font sizes you see are set in appropriate sections.
The Auctiva Preview should show whether the tags are working. Their was a typo on the main picture tag. That's why it failed. I also fixed the main pic, so it wouldn't droop if the right side box runs long.
The "Essentials" table is flexible. I added the "condition" and split the table for measurements on top. Seem like I recall seeing more possible measurements on other seller's listings. I also labeled the top of the section, so everything is easy to find.
There are many online tutorials, texts, and courses.
I've been coding since the 8th grade, back in the 60's. The arthritis and bifocals slow me down a little these days. hehe
Glad you like it. If you test it live, post back the listing number.
Danno
The only test I haven't done is run it through the Auctiva one-page lister to see if the tags are fully working. My code tester gives a clean bill. It's been checked in IE7, Firefox 3, and Safari 3.2.
The code includes the Description piece with <!--- comments --> to denote the beginning and end of that section. The [DESCRIPTION] tag also is commented out. Just need to copy the code to the template editor, remove /cut the Description section piece to the one-page, and uncomment the tag. That piece is now a stand alone TABLE for that right-element. The smoke-white background is in the template code, as is the font family. The entire template uses Verdana, with fallback to Arial, et. al. Font sizes you see are set in appropriate sections.
The Auctiva Preview should show whether the tags are working. Their was a typo on the main picture tag. That's why it failed. I also fixed the main pic, so it wouldn't droop if the right side box runs long.
The "Essentials" table is flexible. I added the "condition" and split the table for measurements on top. Seem like I recall seeing more possible measurements on other seller's listings. I also labeled the top of the section, so everything is easy to find.
There are many online tutorials, texts, and courses.
I've been coding since the 8th grade, back in the 60's. The arthritis and bifocals slow me down a little these days. hehe
Glad you like it. If you test it live, post back the listing number.
Danno
Good morning Danno,
Well, I've updated all of my category templates (skirts, dresses, etc) and will be launching new auctions Sunday evening. When I go live, I will post a link.
I really do appreciate all of your time, patience and help!
Happy Thanksgiving to you and your family,
Deborah
Well, I've updated all of my category templates (skirts, dresses, etc) and will be launching new auctions Sunday evening. When I go live, I will post a link.
I really do appreciate all of your time, patience and help!
Happy Thanksgiving to you and your family,
Deborah
Hi,
Just noticed....
If you want the template to page-center, add align="center" to the very first/top table on the template. That's why it's shifted to page-left on the practiceboard and that test listing you did.
I added the code to the prior for view.
http://practicewriter.com/vu/?52D1F
You have a good one too.
Danno
Edit: I finally found got my color detector software reinstalled and the background on the Model Box is "#C5C6CB". I was close. I used "#C4C4C6", as I could tell it wasn't exact gray and was slightly bluish tint.
The six digit code is Red - Green - Blue (RGB) with each two digits in the sequence the color intensity from 00 to FF. Black is all 000000. White is FFFFFF. Gray is all three exacty same, e.g. 2C2C2C is dark gray.
The neon green and rose on your upper banner are 79E262 and F655A6 at their brightest central points. The lower banner has alot of diffusion, so tough to latch onto a single color for each.
If you'd like I can update the practiceboard to get the gray perfect.
Danno
Just noticed....
If you want the template to page-center, add align="center" to the very first/top table on the template. That's why it's shifted to page-left on the practiceboard and that test listing you did.
I added the code to the prior for view.
http://practicewriter.com/vu/?52D1F
You have a good one too.
Danno
Edit: I finally found got my color detector software reinstalled and the background on the Model Box is "#C5C6CB". I was close. I used "#C4C4C6", as I could tell it wasn't exact gray and was slightly bluish tint.
The six digit code is Red - Green - Blue (RGB) with each two digits in the sequence the color intensity from 00 to FF. Black is all 000000. White is FFFFFF. Gray is all three exacty same, e.g. 2C2C2C is dark gray.
The neon green and rose on your upper banner are 79E262 and F655A6 at their brightest central points. The lower banner has alot of diffusion, so tough to latch onto a single color for each.
If you'd like I can update the practiceboard to get the gray perfect.
Danno
Hi Danno!
If you have time to tweak the colors, that would be appreciated.
I am planning on launching some new auctions this evening around 9-10 p.m. EST.
I just entered measurement/description info into the description box on the 1 pg lister. Saved and previewed, and the description is not showing up in the preview.
The [DESCRIPTION] tag shows in the table you created for it as the first thing. Perhaps I cut and pasted incorrectly?
What do you need to see to take a look at it? I can email you my auctiva sign in info, and you could take a look directly at the template I am attempting to use.
Deb
If you have time to tweak the colors, that would be appreciated.
I am planning on launching some new auctions this evening around 9-10 p.m. EST.
I just entered measurement/description info into the description box on the 1 pg lister. Saved and previewed, and the description is not showing up in the preview.
The [DESCRIPTION] tag shows in the table you created for it as the first thing. Perhaps I cut and pasted incorrectly?
What do you need to see to take a look at it? I can email you my auctiva sign in info, and you could take a look directly at the template I am attempting to use.
Deb
Edit: never mind on the description table not showing up correctly in preview. I did catch the copying of the code in the wrong place, and have corrected it.
You wrote:
If you want the template to page-center, add align="center" to the very first/top table on the template. That's why it's shifted to page-left on the practiceboard and that test listing you did.
I added the code to the prior for view.
Not sure what you are referring to above? The template seemed to be correct to me?
On the colors, let me see what I can do to tweak them myself, as I already set up a template in my saved listings to correspond with each category I list in, and if you do it, I would have to go in and modify each of those templates, and I don't believe I will have time before this evening's auctions, as I have to go finish tiling a bathroom!
Deb
You wrote:
If you want the template to page-center, add align="center" to the very first/top table on the template. That's why it's shifted to page-left on the practiceboard and that test listing you did.
I added the code to the prior for view.
Not sure what you are referring to above? The template seemed to be correct to me?
On the colors, let me see what I can do to tweak them myself, as I already set up a template in my saved listings to correspond with each category I list in, and if you do it, I would have to go in and modify each of those templates, and I don't believe I will have time before this evening's auctions, as I have to go finish tiling a bathroom!
Deb
Hi Deb,
I didn't have alot of time to do extensive work with the lower section until this morning.
What do you think of this?
http://practicewriter.com/vu/?52F16
The USPS is hyperlinked to their Track and Confirm. Note mouseover effect.
I was at your Etsy page and found that mini-Logo. Power Seller logo is also a GIF (I know you're not one, yet. ).
I resection the group and added a Return Policy (an eBay must) using Seller Details [TERMS_OF_SERVICE] tag.
The Shipping is now a table you can cut and paste to the Seller Details (like the Description) to get that split effect.
Note, the "at a glance" ability to see:
1. You use USPS and "Track and Confirm"
2. You have both US and International with quick to find info
3. You use Priority Mail for both and have Free Delivery Confirmation in US
Oh...and I'm testing GIF animation packages and thought the Neon look on the upper banner was just too tempting, not to have some fun. And, you might consider free shipping at some point with $100 minimum.
The About Me and Contact headers are now hyperlinked with Mouseover store-green effect to your About Me page and Ask Seller Question.
This is probably more than you wanted today, but it does add alot to the lower section.
Do you still need help with the color problem?
Danno
I didn't have alot of time to do extensive work with the lower section until this morning.
What do you think of this?
http://practicewriter.com/vu/?52F16
The USPS is hyperlinked to their Track and Confirm. Note mouseover effect.
I was at your Etsy page and found that mini-Logo. Power Seller logo is also a GIF (I know you're not one, yet.
).I resection the group and added a Return Policy (an eBay must) using Seller Details [TERMS_OF_SERVICE] tag.
The Shipping is now a table you can cut and paste to the Seller Details (like the Description) to get that split effect.
Note, the "at a glance" ability to see:
1. You use USPS and "Track and Confirm"
2. You have both US and International with quick to find info
3. You use Priority Mail for both and have Free Delivery Confirmation in US
Oh...and I'm testing GIF animation packages and thought the Neon look on the upper banner was just too tempting, not to have some fun. And, you might consider free shipping at some point with $100 minimum.
The About Me and Contact headers are now hyperlinked with Mouseover store-green effect to your About Me page and Ask Seller Question.
This is probably more than you wanted today, but it does add alot to the lower section.
Do you still need help with the color problem?
Danno
Hi there!
WOW! If you keep beautifying my template, I'm never going to get anything listed, LOL! Actually, a slight nap was in order after tiling, so I am just getting back on...and it is almost your bedtime!
Everything you've taken the time to add is fantastic!
I will add the return policy when I start using this new one. Seems I did read something about it becoming a requirement, even if the return policy is no returns.
As for the free shipping, I do have some listings running with free shipping right now - I just picked some at random while I thought about how I really want to offer it. ebay is really pushing for it, and I know the customers look for it as well. I am wondering if, rather than a dollar amount, more than one purchase might make more sense business wise, as well as generate a little higher ending prices on the $9.99 start auctions? My thoughts: Have fixed price items, mixed with $9.99 auctions. That way, each potential customer will (hopefully) bid on the lower priced items to get to their multiple purchase threshold. So, buy any 3, get free shipping (US only) ?? Ha, that messes up your neon sign!
And, since you are enjoying playing with this template...
I would really like to have a way to have the customers join a mailing list. I've seen it in other's listings (and I really believe it is the key to their high ending prices and so much activity on the listings)
Join our mailing list, be the first to see new offerings, specials, etc. But, I don't know how to add that to a template! But, I'll bet you do!!
OK, I am going to try and get some stuff started still tonight.
Deb
WOW! If you keep beautifying my template, I'm never going to get anything listed, LOL! Actually, a slight nap was in order after tiling, so I am just getting back on...and it is almost your bedtime!
Everything you've taken the time to add is fantastic!
I will add the return policy when I start using this new one. Seems I did read something about it becoming a requirement, even if the return policy is no returns.
As for the free shipping, I do have some listings running with free shipping right now - I just picked some at random while I thought about how I really want to offer it. ebay is really pushing for it, and I know the customers look for it as well. I am wondering if, rather than a dollar amount, more than one purchase might make more sense business wise, as well as generate a little higher ending prices on the $9.99 start auctions? My thoughts: Have fixed price items, mixed with $9.99 auctions. That way, each potential customer will (hopefully) bid on the lower priced items to get to their multiple purchase threshold. So, buy any 3, get free shipping (US only) ?? Ha, that messes up your neon sign!
And, since you are enjoying playing with this template...
I would really like to have a way to have the customers join a mailing list. I've seen it in other's listings (and I really believe it is the key to their high ending prices and so much activity on the listings)
Join our mailing list, be the first to see new offerings, specials, etc. But, I don't know how to add that to a template! But, I'll bet you do!!
OK, I am going to try and get some stuff started still tonight.
Deb
Hi Deb,
This next round wasn't for immediate use; just playing with ideas. It took some time for me to walk through your listings, About Me, and Etsy to get ideas and add/create the correct elements. I wanted to make certain you had something for Saturday/Sunday listing, which is why I stopped and locked/tested what I had for Phase I. It was just the timing and the rush to get you something useful.
On this (Phase II) I wanted to give you enhancements on the lower section, and maybe some future suggestions (reserved options). That's why I was playfully adding things like the Neon sign and the PowerSeller logo. That neon helped pull-down the colors in the upper banner with a "retro" concept, i.e. neon being associated with the retro look. That neon tub text is actually a Font, so the sign was fairly easy to make. Took about 30 minutes. It was also a good test of the product, and I did find some problems during tests.
Most web sites are offering free shipping with minimum purchase, which eBay does support in shipping calculation settings (preferences). I would suggest examining methods that work for combined in checkout without manual invoicing or refunds.
Hmmm....I think the mailing list might be tied to the "favorite sellers" feature. I'll have to check and see if that's only for Store. That's a good add.
Danno
Edit: Why or what requirement is causing you to have more than a single version of this template at Auctiva?
This next round wasn't for immediate use; just playing with ideas. It took some time for me to walk through your listings, About Me, and Etsy to get ideas and add/create the correct elements. I wanted to make certain you had something for Saturday/Sunday listing, which is why I stopped and locked/tested what I had for Phase I. It was just the timing and the rush to get you something useful.
On this (Phase II) I wanted to give you enhancements on the lower section, and maybe some future suggestions (reserved options). That's why I was playfully adding things like the Neon sign and the PowerSeller logo. That neon helped pull-down the colors in the upper banner with a "retro" concept, i.e. neon being associated with the retro look. That neon tub text is actually a Font, so the sign was fairly easy to make. Took about 30 minutes. It was also a good test of the product, and I did find some problems during tests.
Most web sites are offering free shipping with minimum purchase, which eBay does support in shipping calculation settings (preferences). I would suggest examining methods that work for combined in checkout without manual invoicing or refunds.
Hmmm....I think the mailing list might be tied to the "favorite sellers" feature. I'll have to check and see if that's only for Store. That's a good add.
Danno
Edit: Why or what requirement is causing you to have more than a single version of this template at Auctiva?
Good evening!
No, I didn't even try to use your latest version with the lower half of enhancements.
The reason I use more than 1 template:
I set up a blank template for: dresses, skirts, tops, jackets and coats, etc.
So, if I am listing a dress, the category is selected and the correct shipping charge is already saved; all I have to do is add the description & measurements, and then the pics and I'm done with that item.
No, I didn't even try to use your latest version with the lower half of enhancements.
The reason I use more than 1 template:
I set up a blank template for: dresses, skirts, tops, jackets and coats, etc.
So, if I am listing a dress, the category is selected and the correct shipping charge is already saved; all I have to do is add the description & measurements, and then the pics and I'm done with that item.
Hi Deb,
My memory on the "mailing list" was STORE feature. I think that's correct, but I'll have to do some more checking. Here's the eBay info page on the feature:
http://pages.ebay.com/help/sell/email-newsletter.html
Did you know you can move the Auctiva Store Window inside the template? Here's why I strategically place that secondary store bannner in the middle of the lower section:
http://practicewriter.com/vu/?5302D
Oh, and that's a marquee doing the sales pitch to "buy 4" and "Great Deals" on my Store Window.
If we can work through changes, I'll try to lock tne next set. I did spot a few minor glitches on that listing you did last night and am making code corrections.
Danno
Edit: And, your Street is now "zoned".
My memory on the "mailing list" was STORE feature. I think that's correct, but I'll have to do some more checking. Here's the eBay info page on the feature:
http://pages.ebay.com/help/sell/email-newsletter.html
Did you know you can move the Auctiva Store Window inside the template? Here's why I strategically place that secondary store bannner in the middle of the lower section:
http://practicewriter.com/vu/?5302D
Oh, and that's a marquee doing the sales pitch to "buy 4" and "Great Deals" on my Store Window.
If we can work through changes, I'll try to lock tne next set. I did spot a few minor glitches on that listing you did last night and am making code corrections.
Danno
Edit: And, your Street is now "zoned".
You just keep making it better and better!
I am thinking about the free shipping lure I want to use. I am going to sleep on it, but I am leaning towards BINs get free shipping. Of course, ebay gets 12% of the new 30 day BIN in the clothing cat, and there is always Paypal's cut, so the 3 elements together add up to a big bite on a $40 item.
Too bad about the email list feature. I will ponder whether or not $16/month is worth it just to get that feature added.
I like where you positioned the auctiva gallery, we will keep that!
This is so exciting, working on the template with you! I know, get a life, LOL!
I am thinking about the free shipping lure I want to use. I am going to sleep on it, but I am leaning towards BINs get free shipping. Of course, ebay gets 12% of the new 30 day BIN in the clothing cat, and there is always Paypal's cut, so the 3 elements together add up to a big bite on a $40 item.
Too bad about the email list feature. I will ponder whether or not $16/month is worth it just to get that feature added.
I like where you positioned the auctiva gallery, we will keep that!
This is so exciting, working on the template with you! I know, get a life, LOL!
Hi,
Glad you like that zone banner.
I also thought about exchanging the "f" with a "p", as in, fashion is my pashion [sic]. Yes, I know it's spelled passion. It's the word-play on a young, sophisticated girl's passion for fashion with the combo-word pashion. I am assuming that's your target buyer.
The concept for the lower portion of the bottom section is "fashion magazine page".
Not bad for a 55 yo grandfather...hehe
Danno
Edit: What is the Font Family for your logo, i.e. it uses the tilted "e"? It might help this possibility, but it's not too bad already.
http://practicewriter.com/vu/?5302D
Now how about this idea for the internal text:
"Indulge your passion for fashion."
or
"Surrender to your passion for fashion."
Are we having fun yet?
We need to talk about the "photo problems".
Glad you like that zone banner.
I also thought about exchanging the "f" with a "p", as in, fashion is my pashion [sic]. Yes, I know it's spelled passion. It's the word-play on a young, sophisticated girl's passion for fashion with the combo-word pashion. I am assuming that's your target buyer.
The concept for the lower portion of the bottom section is "fashion magazine page".
Not bad for a 55 yo grandfather...hehe
Danno
Edit: What is the Font Family for your logo, i.e. it uses the tilted "e"? It might help this possibility, but it's not too bad already.
http://practicewriter.com/vu/?5302D
Now how about this idea for the internal text:
"Indulge your passion for fashion."
or
"Surrender to your passion for fashion."
Are we having fun yet?We need to talk about the "photo problems".
Hi Danno,
Link to my font...it is eurofurence
http://www.dafont.com/theme.php?cat=501&page=1&nb_ppp_o...0&psize=m&classt=pop
and the font for the tagline is:
http://www.dafont.com/windsong.font?text=...where+eco+%26+style+meet
Watcha thinkin' of doin'??
I like "Indulge your passion for fashion."
DO I HAVE PHOTO PROBLEMS?? Still?
Deb
Link to my font...it is eurofurence
http://www.dafont.com/theme.php?cat=501&page=1&nb_ppp_o...0&psize=m&classt=pop
and the font for the tagline is:
http://www.dafont.com/windsong.font?text=...where+eco+%26+style+meet
Watcha thinkin' of doin'??
I like "Indulge your passion for fashion."
DO I HAVE PHOTO PROBLEMS?? Still?
Deb
This is the old with Verdana.
This is an update with the eurofurence.
Which do you like better? I like the "e" match.
I could add that tag-line on "indulge" under it in your tag-line font.
Danno
This is an update with the eurofurence.
Which do you like better? I like the "e" match.
I could add that tag-line on "indulge" under it in your tag-line font.
Danno
Hey!
I happen to be on! I like the match font.
What do you mean ...talk about pic problems?
I happen to be on! I like the match font.
What do you mean ...talk about pic problems?